Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 16 Number of Teeth
- 1.88 in Outside Diameter
- L075 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Type | PB |
| Belt Width | 0.75 in |
| Bore Type | Bushed |
| Material | Steel |
| Outside Dia. | 1.88 in |
| Bore Range [Min] | 0.5 in |
| Bushing Series | N/A |
| Bushing Type | None |
| No. of Screws | 1 |
| Belt Size | L075 |
| Pitch Diameter | 1.91 in |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 1.625 in |
| Hub Type | B |
| Finished Bore | N/A |
| No. of Teeth | 16 |
| Hub Dia. | 1.437 in |
| Hub Projection | 5/8 in |
| Bore Range [Max] | 1.125 in |
| Set Screw Size | 1/4-20 x 1/4 |
| Belt Pitch | 0.375 in |
| Weight | 1.0 LB |
| EAN or UPC | 697950101019 |
