Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 16 Number of Teeth
- 1.88 in Outside Diameter
- L075 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | N/A |
| Belt Size | L075 |
| Hub Projection | 5/8 in |
| Hardened Teeth | Without Hardened Teeth |
| Outside Dia. | 1.88 in |
| Length Through Bore | 1.625 in |
| Type | PB |
| Material | Steel |
| Bore Type | Bushed |
| No. of Screws | 1 |
| Belt Pitch | 0.375 in |
| Pitch Diameter | 1.91 in |
| Bore Range [Min] | 0.5 in |
| Bore Range [Max] | 1.125 in |
| Belt Width | 0.75 in |
| Bushing Type | None |
| Hub Dia. | 1.437 in |
| No. of Teeth | 16 |
| Finished Bore | N/A |
| Hub Type | B |
| Set Screw Size | 1/4-20 x 1/4 |
| Weight | 1.0 LB |
| EAN or UPC | 697950101019 |
