Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 16 Number of Teeth
- 2.492 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Outside Dia. | 2.4920 in |
| Hub Projection | 3/4 in |
| Belt Width | 1 1/2 in |
| Finished Bore | N/A |
| Type | PB |
| Length Through Bore | 2.562 in |
| No. of Teeth | 16 |
| Bushing Type | None |
| Hardened Teeth | With Hardened Teeth |
| Belt Pitch | 1/2 in |
| Material | Steel |
| Belt Size | H |
| Bushing Series | N/A |
| Bore Type | Reborable |
| Hub Dia. | 2 in |
| Pitch Diameter | 2.546 in |
| Bore Range [Min] | 3/4 in |
| Hub Type | B |
| Bore Range [Max] | 1 1/4 in |
| Weight | 2.5 LB |
| EAN or UPC | 697950150994 |
