Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 15 Number of Teeth
- 0.93 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | None |
| Length Through Bore | 0.781 in |
| Hub Type | B |
| No. of Screws | 2 |
| No. of Teeth | 15 |
| Bore Range [Min] | 0.25 in |
| Bushing Series | N/A |
| Hub Projection | 0.218 in |
| Belt Pitch | 0.2 in |
| Outside Dia. | 0.93 in |
| Belt Width | 0.25 in, 0.375 in |
| Pitch Diameter | 0.955 in |
| Hardened Teeth | Without Hardened Teeth |
| Type | DF-1 |
| Belt Size | XL037 |
| Bore Range [Max] | 0.437 in |
| Finished Bore | N/A |
| Material | Steel |
| Set Screw Size | 8-32 x 1/8 |
| Hub Dia. | 5/8 in |
| Bore Type | Bushed |
| Weight | 0.09 LB |
| EAN or UPC | 697950099507 |
