Find a Service Center
- 0.75 in Inner Diameter
- 1.01 in Outer Diameter
- 1 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Dynamic Load Rating | 8.9 kN |
| Enclosure | Open |
| Operating Temperature [Max] | 230 ËšF |
| O.D. Type | Straight |
| Working Load | 1030 lbf |
| Tolerance | Iso Class 0 (RBEC 1) |
| Lubricant | Rust Preventative |
| Clamp Torque | 196 lbf |
| Precision Ground | Yes |
| Series | RCB |
| Relubrication Feature | No |
| Component | Assembly |
| Overall Width | 1 in, 25.4 mm |
| Cage Material | Nylon |
| Outer Ring Width | 1 in, 25.4 mm |
| Shaft Dia. [Max] | 0.75 in |
| Housing Bore [Min] | 0.9995 in |
| Capacity | Standard Capacity |
| Precision Class | ABEC 1 |
| Radial Internal Clearance Specification | N/A |
| Self Aligning | No |
| No. of Rows | 3 |
| End Type | Open End |
| Speed (Max) Oil | 12000 rpm |
| Rolling Element | Roller |
| Radial Internal Clearance | N/A |
| Operating Temperature [Min] | -22 ËšF |
| Mounting Method | Press Fit |
| O.D. | 1 in |
| I.D. | 3/4 in |
| Oil Hole | w/o Oil Hole |
| Cage Type | Window |
| Bore Type | Round Bore, Inch Type |
| Housing Shoulder Diameter | 1.4 in |
| Static Load Rating | 9.79 kN |
| Housing Bore [Max] | 1.0005 in |
| Bearing Design | Roller Clutch |
| Relubricatable | No |
| Shaft Dia. [Min] | 0.7495 in |
| Bearing Material | 1014 Steel |
| Origin | Roller Clutches |
| Weight | 0.007 LB |
| EAN or UPC | 605790188534 |
