Find a Service Center
- 0.75 in Inner Diameter
- 1.01 in Outer Diameter
- 1 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Speed (Max) Oil | 12000 rpm |
| O.D. | 1 in |
| Housing Bore [Max] | 1.0005 in |
| Capacity | Standard Capacity |
| Shaft Dia. [Min] | 0.7495 in |
| Bearing Design | Roller Clutch |
| Relubricatable | No |
| Radial Internal Clearance Specification | N/A |
| Operating Temperature [Min] | -22 ËšF |
| Series | RCB |
| Precision Ground | Yes |
| Precision Class | ABEC 1 |
| Shaft Dia. [Max] | 0.75 in |
| Overall Width | 1 in, 25.4 mm |
| Operating Temperature [Max] | 230 ËšF |
| Mounting Method | Press Fit |
| Lubricant | Rust Preventative |
| Static Load Rating | 9.79 kN |
| Housing Bore [Min] | 0.9995 in |
| Self Aligning | No |
| Tolerance | Iso Class 0 (RBEC 1) |
| Outer Ring Width | 1 in, 25.4 mm |
| Relubrication Feature | No |
| Origin | Roller Clutches |
| Cage Material | Nylon |
| Radial Internal Clearance | N/A |
| Bore Type | Round Bore, Inch Type |
| End Type | Open End |
| Housing Shoulder Diameter | 1.4 in |
| O.D. Type | Straight |
| I.D. | 3/4 in |
| Bearing Material | 1014 Steel |
| Dynamic Load Rating | 8.9 kN |
| Working Load | 1030 lbf |
| Clamp Torque | 196 lbf |
| No. of Rows | 3 |
| Oil Hole | w/o Oil Hole |
| Cage Type | Window |
| Component | Assembly |
| Enclosure | Open |
| Rolling Element | Roller |
| Weight | 0.007 LB |
| EAN or UPC | 605790188534 |
