Find a Service Center
- 0.63 in Inner Diameter
- 0.88 in Outer Diameter
- 1 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| End Type | Open End |
| Capacity | Standard Capacity |
| Self Aligning | No |
| Bore Type | Round Bore, Inch Type |
| Housing Bore [Max] | 0.8755 in |
| No. of Rows | 3 |
| Housing Bore [Min] | 0.8745 in |
| Cage Type | Window |
| Radial Internal Clearance Specification | N/A |
| Relubricatable | No |
| Radial Internal Clearance | N/A |
| Shaft Dia. [Max] | 0.625 in |
| Lubricant | Rust Preventative |
| Origin | Roller Clutches |
| Component | Assembly |
| Series | RCB |
| Tolerance | Iso Class 0 (RBEC 1) |
| I.D. | 5/8 in |
| Outer Ring Width | 1 in, 25.4 mm |
| O.D. | 0.875 in |
| Precision Ground | Yes |
| Bearing Design | Roller Clutch |
| Overall Width | 1 in, 25.4 mm |
| Housing Shoulder Diameter | 1.2 in |
| Operating Temperature [Max] | 230 ˚F |
| Relubrication Feature | No |
| Bearing Material | 1014 Steel |
| Shaft Dia. [Min] | 0.6245 in |
| Enclosure | Open |
| Mounting Method | Press Fit |
| Working Load | 914 lbf |
| Operating Temperature [Min] | -22 ˚F |
| Precision Class | ABEC 1 |
| O.D. Type | Straight |
| Rolling Element | Roller |
| Static Load Rating | 8.14 kN |
| Dynamic Load Rating | 8.05 kN |
| Oil Hole | w/o Oil Hole |
| Speed (Max) Oil | 14000 rpm |
| Clamp Torque | 143 lbf |
| Cage Material | Plastic |
| Weight | 0.006 LB |
| EAN or UPC | 605790197116 |
