Find a Service Center
- 0.63 in Inner Diameter
- 0.88 in Outer Diameter
- 1 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Cage Type | Window |
| Shaft Dia. [Max] | 0.625 in |
| Bore Type | Round Bore, Inch Type |
| Working Load | 914 lbf |
| Radial Internal Clearance Specification | N/A |
| Radial Internal Clearance | N/A |
| Self Aligning | No |
| Housing Bore [Min] | 0.8745 in |
| Relubrication Feature | No |
| O.D. | 0.875 in |
| Rolling Element | Roller |
| Bearing Design | Roller Clutch |
| Origin | Roller Clutches |
| Component | Assembly |
| No. of Rows | 3 |
| Overall Width | 1 in, 25.4 mm |
| Series | RCB |
| Operating Temperature [Min] | -22 ˚F |
| Oil Hole | w/o Oil Hole |
| Housing Bore [Max] | 0.8755 in |
| Cage Material | Plastic |
| Enclosure | Open |
| Operating Temperature [Max] | 230 ˚F |
| Relubricatable | No |
| Mounting Method | Press Fit |
| O.D. Type | Straight |
| Lubricant | Rust Preventative |
| Precision Ground | Yes |
| Tolerance | Iso Class 0 (RBEC 1) |
| I.D. | 5/8 in |
| Clamp Torque | 143 lbf |
| Precision Class | ABEC 1 |
| Capacity | Standard Capacity |
| Outer Ring Width | 1 in, 25.4 mm |
| End Type | Open End |
| Speed (Max) Oil | 14000 rpm |
| Bearing Material | 1014 Steel |
| Static Load Rating | 8.14 kN |
| Housing Shoulder Diameter | 1.2 in |
| Dynamic Load Rating | 8.05 kN |
| Shaft Dia. [Min] | 0.6245 in |
| Weight | 0.006 LB |
| EAN or UPC | 605790197116 |
