RC-061008-FS

Single Row Steel Needle Roller Bearing

Item #101681848

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

O.D. Type	Straight
End Type	Open End
Rolling Element	Roller
Operating Temperature [Max]	230 ˚F
Cage Type	Window
Shaft Dia. [Min]	0.3745 in
Speed (Max) Oil	18000 rpm
Operating Temperature [Min]	-22 ˚F
Oil Hole	w/o Oil Hole
Housing Shoulder Diameter	0.88 in
Lubricant	Rust Preventative
Enclosure	Open
Outer Ring Width	0.5 in, 12.7 mm
Series	RC
Bearing Design	Roller Clutch
Radial Internal Clearance Specification	N/A
Relubrication Feature	No
No. of Rows	1
Clamp Torque	45.4 lbf
Precision Class	ABEC 1
Relubricatable	No
Bore Type	Round Bore, Inch Type
Precision Ground	Yes
Tolerance	Iso Class 0 (RBEC 1)
Origin	Roller Clutches
Component	Assembly
Self Aligning	No
Housing Bore [Min]	0.6245 in
Bearing Material	1014 Steel
Overall Width	0.5 in, 12.7 mm
I.D.	3/8 in
Radial Internal Clearance	N/A
O.D.	0.625 in
Capacity	Standard Capacity
Shaft Dia. [Max]	0.375 in
Cage Material	Nylon
Mounting Method	Press Fit
Housing Bore [Max]	0.6255 in
Weight	0.003 LB
EAN or UPC	605790205699