RC-061008-FS

Single Row Steel Needle Roller Bearing

Item #101681848

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

Mounting Method	Press Fit
I.D.	3/8 in
Shaft Dia. [Min]	0.3745 in
Lubricant	Rust Preventative
Housing Bore [Max]	0.6255 in
Precision Class	ABEC 1
Tolerance	Iso Class 0 (RBEC 1)
Bore Type	Round Bore, Inch Type
Bearing Material	1014 Steel
Oil Hole	w/o Oil Hole
Capacity	Standard Capacity
Outer Ring Width	0.5 in, 12.7 mm
Housing Shoulder Diameter	0.88 in
Series	RC
Self Aligning	No
O.D.	0.625 in
No. of Rows	1
Operating Temperature [Min]	-22 ˚F
Component	Assembly
End Type	Open End
Clamp Torque	45.4 lbf
Operating Temperature [Max]	230 ˚F
Bearing Design	Roller Clutch
Housing Bore [Min]	0.6245 in
Radial Internal Clearance	N/A
Overall Width	0.5 in, 12.7 mm
Enclosure	Open
Relubrication Feature	No
Speed (Max) Oil	18000 rpm
Shaft Dia. [Max]	0.375 in
Relubricatable	No
O.D. Type	Straight
Origin	Roller Clutches
Cage Type	Window
Rolling Element	Roller
Radial Internal Clearance Specification	N/A
Cage Material	Nylon
Precision Ground	Yes
Weight	0.003 LB
EAN or UPC	605790205699