Find a Service Center
- 0.25 in Inner Diameter
- 0.44 in Outer Diameter
- 0.5 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Bearing Material | 1014 Steel |
| Operating Temperature [Max] | 230 ËšF |
| I.D. | 1/4 in |
| Operating Temperature [Min] | -22 ËšF |
| O.D. | 0.4375 in |
| Outer Ring Width | 0.5 in, 12.7 mm |
| Enclosure | Open |
| Tolerance | Iso Class 0 (RBEC 1) |
| Cage Material | Nylon |
| Speed (Max) Oil | 20000 rpm |
| Bore Type | Round Bore, Inch Type |
| No. of Rows | 1 |
| Lubricant | Rust Preventative |
| Cage Type | Window |
| Oil Hole | w/o Oil Hole |
| O.D. Type | Straight |
| Capacity | Standard Capacity |
| Precision Ground | Yes |
| Radial Internal Clearance Specification | N/A |
| Rolling Element | Roller |
| Relubricatable | No |
| Radial Internal Clearance | N/A |
| Series | RC |
| Bearing Design | Roller Clutch |
| End Type | Open End |
| Component | Assembly |
| Precision Class | ABEC 1 |
| Overall Width | 0.5 in, 12.7 mm |
| Mounting Method | Press Fit |
| Relubrication Feature | No |
| Self Aligning | No |
| Weight | 0.008 LB |
| EAN or UPC | 605790205682 |
