Find a Service Center
- 0.25 in Inner Diameter
- 0.44 in Outer Diameter
- 0.5 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Lubricant | Rust Preventative |
| Rolling Element | Roller |
| Tolerance | Iso Class 0 (RBEC 1) |
| Operating Temperature [Min] | -22 ˚F |
| Oil Hole | w/o Oil Hole |
| Speed (Max) Oil | 20000 rpm |
| I.D. | 1/4 in |
| Radial Internal Clearance | N/A |
| Enclosure | Open |
| Operating Temperature [Max] | 230 ˚F |
| Relubrication Feature | No |
| Overall Width | 0.5 in, 12.7 mm |
| Capacity | Standard Capacity |
| O.D. Type | Straight |
| Radial Internal Clearance Specification | N/A |
| O.D. | 0.4375 in |
| Precision Class | ABEC 1 |
| No. of Rows | 1 |
| Series | RC |
| Cage Material | Nylon |
| Bearing Material | 1014 Steel |
| Relubricatable | No |
| Mounting Method | Press Fit |
| Precision Ground | Yes |
| Component | Assembly |
| Bore Type | Round Bore, Inch Type |
| Cage Type | Window |
| End Type | Open End |
| Bearing Design | Roller Clutch |
| Self Aligning | No |
| Outer Ring Width | 0.5 in, 12.7 mm |
| Weight | 0.008 LB |
| EAN or UPC | 605790205682 |
