Find a Service Center
description
- Timken has introduced one of the easiest-to-install housed units available. It features a conventional setscrew, but provides shaft protection and prolongs the life of the shaft - no nicks, raised metal or permanent shaft damage. You'll find Timken's patented shaft guarding technology where production uptime is critical and shaft replacement is expensive. Where traditional setscrew products rely on the setscrews to dig into the shaft to maintain grip, Timken's shaft guarding technology transfers the pressure of the setscrews through a stainless steel, hardened band. This absorbs the problems encountered from relative motion typically associated with setscrew product. The stainless band will not corrode the shaft. Shaft guarding technology exceeds gripping application requirements, maintains dimensional integrity and reduces fretting corrosion. It locks to the shaft like a traditional setscrew, but with new benefits.
features
- 1 7/16" shaft diameter
- Easiest, quickest, simplest to mount and install
- Timken Shaft Guard Technology™ eliminates shaft damage from set screws
| Base Length | 6 9/16 in |
| Housing Height | 3 3/4 in |
| Pillow Block Type | Thru-Bolt |
| Collar O.D. | 1.844 in |
| Bearing Type | Ball Bearing |
| Overall Width | 2 1/32 in |
| Bolt Size | 1/2 in |
| Bolt Hole Length | 31/32 in |
| Housing Material | Cast Iron - Powder Coated |
| Seal Type | Contact Seals |
| Bolt Hole Spacing | 5 1/8 in |
| Shaft Dia. | 1.4375 in |
| Locking Device | Setscrew Locking Collar |
| Outer Ring Size | 207 |
| Length Through Bore | 1.78125 in |
| Bearing Design | Non-Expansion |
| Bolt Hole Width | 9/16 in |
| Inch/Metric | Inch |
| Bolt Holes | 2-Bolt |
| Base Height | 23/32 in |
| Bearing Insert | GY1107KKRB TDCF |
| Mounted Unit Duty | Corrosion Resistant-Duty |
| Lubrication | Relubricatable |
| Base Width | 1 27/32 in |
| End Type | Open End |
| Center of Bearing to Front of Inner Ring | 1 7/64 in |
| Weight | 1.68 KG |
| EAN or UPC | 87796265776 |
