Find a Service Center
description
- Timken has introduced one of the easiest-to-install housed units available. It features a conventional setscrew, but provides shaft protection and prolongs the life of the shaft - no nicks, raised metal or permanent shaft damage. You'll find Timken's patented shaft guarding technology where production uptime is critical and shaft replacement is expensive. Where traditional setscrew products rely on the setscrews to dig into the shaft to maintain grip, Timken's shaft guarding technology transfers the pressure of the setscrews through a stainless steel, hardened band. This absorbs the problems encountered from relative motion typically associated with setscrew product. The stainless band will not corrode the shaft. Shaft guarding technology exceeds gripping application requirements, maintains dimensional integrity and reduces fretting corrosion. It locks to the shaft like a traditional setscrew, but with new benefits.
features
- 1 7/16" shaft diameter
- Easiest, quickest, simplest to mount and install
- Timken Shaft Guard Technology™ eliminates shaft damage from set screws
| Base Length | 6 9/16 in |
| End Type | Open End |
| Bolt Hole Spacing | 5 1/8 in |
| Shaft Dia. | 1.4375 in |
| Pillow Block Type | Thru-Bolt |
| Mounted Unit Duty | Corrosion Resistant-Duty |
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Seal Type | Contact Seals |
| Bolt Size | 1/2 in |
| Base Height | 23/32 in |
| Outer Ring Size | 207 |
| Inch/Metric | Inch |
| Bearing Insert | GY1107KKRB TDCF |
| Collar O.D. | 1.844 in |
| Housing Height | 3 3/4 in |
| Center of Bearing to Front of Inner Ring | 1 7/64 in |
| Locking Device | Setscrew Locking Collar |
| Bolt Holes | 2-Bolt |
| Overall Width | 2 1/32 in |
| Bolt Hole Width | 9/16 in |
| Bearing Type | Ball Bearing |
| Base Width | 1 27/32 in |
| Bolt Hole Length | 31/32 in |
| Housing Material | Cast Iron - Powder Coated |
| Length Through Bore | 1.78125 in |
| Weight | 1.68 KG |
| EAN or UPC | 87796265776 |
