Find a Service Center
Alternate Products
- 20 mm Shaft, 31.75 mm Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Size | M10 |
| Shaft Dia. | 20 mm |
| Lubrication | Relubricatable |
| Bolt Holes | 2 |
| Housing Material | Cast Iron |
| Series | YAK Series |
| Base Width | 31.8 mm |
| Housing Construction | 1 Piece |
| Bolt Hole Spacing Range [Max] | 155.8000 mm |
| Bolt Hole Spacing Range [Min] | 76.2000 mm |
| Overall Width | 34.13 mm |
| Collar O.D. | 27.56 mm |
| Housing Height | 62.7 mm |
| Insert Type | Steel Insert |
| Bolt Hole Spacing | 96 mm |
| Inch/Metric | Metric |
| Base Height | 11.9 mm |
| End Type | Open End |
| Pillow Block Type | Thru-Bolt |
| Bearing Type | Ball Bearing |
| Bearing Insert | GYE20KRRB |
| Locking Device | Setscrew Locking Collar |
| Bearing Design | Non-Expansion |
| Length Through Bore | 30.9 mm |
| Mounted Unit Duty | Normal-Duty |
| Base Length | 127 mm |
| Seal Type | Contact Seals |
| Weight | 1.494 LB |
| EAN or UPC | 87796169623 |
