
- 20 mm Shaft, 31.75 mm Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
Bearing Design | Non-Expansion |
Base Width | 31.8 mm |
Bolt Holes | 2 |
End Type | Open End |
Bolt Size | M10 |
Pillow Block Type | Thru-Bolt |
Bearing Type | Ball Bearing |
Series | YAK Series |
Bolt Hole Spacing Range [Max] | 155.8000 mm |
Lubrication | Relubricatable |
Overall Width | 34.13 mm |
Mounted Unit Duty | Normal-Duty |
Housing Material | Cast Iron |
Inch/Metric | Metric |
Bolt Hole Spacing Range [Min] | 76.2000 mm |
Shaft Dia. | 20 mm |
Seal Type | Contact Seals |
Housing Construction | 1 Piece |
Base Height | 11.9 mm |
Length Through Bore | 30.9 mm |
Collar O.D. | 27.56 mm |
Base Length | 127 mm |
Housing Height | 62.7 mm |
Bearing Insert | GYE20KRRB |
Insert Type | Steel Insert |
Locking Device | Setscrew Locking Collar |
Bolt Hole Spacing | 96 mm |
Weight | 1.494 LB |
EAN or UPC | 87796169623 |
