Find a Service Center
Alternate Products
- 2.9375" Shaft, 3.3125" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Fans and blowers
- Food processing
- Conveyors
- Agriculture
| Pillow Block Type | Thru-Bolt |
| Shaft Dia. | 2.9375 in |
| Overall Width | 3 3/8 in |
| Bolt Size | 3/4 in |
| Housing Material | Cast Iron |
| Base Width | 3 1/4 in |
| Bearing Design | Non-Expansion |
| Series | YAK Series |
| Base Length | 12 in |
| Housing Construction | 1 Piece |
| Bearing Type | Ball Bearing |
| Bolt Holes | 2 |
| Housing Height | 6 7/16 in |
| Bearing Insert | GY1215KRRB |
| Length Through Bore | 3.0625 in |
| Bolt Hole Spacing Range [Min] | 8 1/4 in |
| Base Height | 1 1/2 in |
| Mounted Unit Duty | Normal-Duty |
| Locking Device | Setscrew Locking Collar |
| Insert Type | Steel Insert |
| Bolt Hole Spacing | 9 1/2 in |
| Collar O.D. | 3.619 in |
| Seal Type | Contact Seals |
| Inch/Metric | Inch |
| Lubrication | Relubricatable |
| Bolt Hole Spacing Range [Max] | 10 3/4 in |
| End Type | Open End |
| Weight | 19.25 LB |
| EAN or UPC | 87796157637 |
