Find a Service Center
Alternate Products
- 2.9375" Shaft, 3.3125" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Fans and blowers
- Food processing
- Conveyors
- Agriculture
| Bearing Type | Ball Bearing |
| Base Height | 1 1/2 in |
| Pillow Block Type | Thru-Bolt |
| Shaft Dia. | 2.9375 in |
| Bolt Hole Spacing Range [Min] | 8 1/4 in |
| Mounted Unit Duty | Normal-Duty |
| Bolt Hole Spacing Range [Max] | 10 3/4 in |
| Locking Device | Setscrew Locking Collar |
| Bearing Insert | GY1215KRRB |
| Collar O.D. | 3.619 in |
| Seal Type | Contact Seals |
| Lubrication | Relubricatable |
| Housing Construction | 1 Piece |
| Inch/Metric | Inch |
| Housing Height | 6 7/16 in |
| Base Length | 12 in |
| Length Through Bore | 3.0625 in |
| Insert Type | Steel Insert |
| Bolt Size | 3/4 in |
| Base Width | 3 1/4 in |
| Housing Material | Cast Iron |
| Bearing Design | Non-Expansion |
| Overall Width | 3 3/8 in |
| Bolt Hole Spacing | 9 1/2 in |
| Series | YAK Series |
| End Type | Open End |
| Bolt Holes | 2 |
| Weight | 19.25 LB |
| EAN or UPC | 87796157637 |
