Find a Service Center
Alternate Products
- 2.6875" Shaft, 3" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Hole Spacing | 8 in |
| Seal Type | Contact Seals |
| Bolt Hole Spacing Range [Max] | 9 3/8 in |
| Inch/Metric | Inch |
| Bearing Type | Ball Bearing |
| Bolt Holes | 2 |
| Base Height | 1 5/16 in |
| Locking Device | Setscrew Locking Collar |
| Housing Material | Cast Iron |
| Bearing Design | Non-Expansion |
| Length Through Bore | 2.75 in |
| Housing Height | 6 1/16 in |
| Bearing Insert | GY1211KRRB |
| Mounted Unit Duty | Normal-Duty |
| Base Width | 2 7/8 in |
| Lubrication | Relubricatable |
| Collar O.D. | 3.422 in |
| End Type | Open End |
| Shaft Dia. | 2.6875 in |
| Housing Construction | 1 Piece |
| Insert Type | Steel Insert |
| Base Length | 10 1/2 in |
| Pillow Block Type | Thru-Bolt |
| Series | YAK Series |
| Overall Width | 3 1/8 in |
| Bolt Size | 3/4 in |
| Bolt Hole Spacing Range [Min] | 6 5/8 in |
| Weight | 16.18 LB |
| EAN or UPC | 87796157620 |
