Find a Service Center
Alternate Products
- 2.6875" Shaft, 3" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Length | 10 1/2 in |
| Lubrication | Relubricatable |
| Collar O.D. | 3.422 in |
| Shaft Dia. | 2.6875 in |
| End Type | Open End |
| Bolt Holes | 2 |
| Inch/Metric | Inch |
| Housing Material | Cast Iron |
| Series | YAK Series |
| Bearing Type | Ball Bearing |
| Bolt Size | 3/4 in |
| Housing Construction | 1 Piece |
| Mounted Unit Duty | Normal-Duty |
| Bolt Hole Spacing Range [Max] | 9 3/8 in |
| Seal Type | Contact Seals |
| Base Height | 1 5/16 in |
| Bearing Insert | GY1211KRRB |
| Locking Device | Setscrew Locking Collar |
| Base Width | 2 7/8 in |
| Length Through Bore | 2.75 in |
| Bolt Hole Spacing | 8 in |
| Insert Type | Steel Insert |
| Bearing Design | Non-Expansion |
| Overall Width | 3 1/8 in |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing Range [Min] | 6 5/8 in |
| Housing Height | 6 1/16 in |
| Weight | 16.18 LB |
| EAN or UPC | 87796157620 |
