Find a Service Center
- Single Row Radial Bearing, 1.251" Hex ID x 3.14961" OD x 1 7/16" Wide, Double Sealed (Tri-Ply), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3), Self-Aligning OD
- Ag Duty
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Temperature Range [Max] | 275 °F |
| Cage Material | Steel |
| No. in Set | Single Bearing |
| Precision | Standard |
| Cage Type | Metal |
| Capacity | Standard Capacity |
| Origin | Single Row Radial |
| Preload Level | None |
| Outer Ring Width | 18 mm |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Rows of Balls | Single |
| Ball Material | Steel |
| Enclosure | Double Sealed |
| Contact Angle | 0° |
| Temperature Range [Min] | -30 °F |
| Lubricant | Polyurea Base |
| Seal Type | Tri-Ply Shroud Seals |
| Snap Ring | No Snap Ring |
| Radial Internal Clearance | C3 |
| O.D. Type | Spherical |
| Seal Material | Buna-N |
| Dynamic Load Rating | 8130 lbf |
| Bore Type | Hex Bore |
| Bearing Type | Radial |
| I.D. | 1 1/4 in |
| O.D. | 3.14961 in |
| Inch/Metric | Inch Bore |
| Static Load Rating [Max] | 4460 lbf |
| Locking Device | No Locking Device |
| Inner Ring Width | 1 7/16 in |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Weight | 1.57 LB |
| EAN or UPC | 87796041387 |
