Find a Service Center
- Single Row Radial Bearing, 1.251" Hex ID x 3.14961" OD x 1 7/16" Wide, Double Sealed (Tri-Ply), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3), Self-Aligning OD
- Ag Duty
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Static Load Rating [Max] | 4460 lbf |
| Temperature Range [Max] | 275 °F |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Radial Internal Clearance | C3 |
| Cage Type | Metal |
| Seal Material | Buna-N |
| Enclosure | Double Sealed |
| Inch/Metric | Inch Bore |
| Temperature Range [Min] | -30 °F |
| Ball Material | Steel |
| Material | Steel |
| I.D. | 1 1/4 in |
| Origin | Single Row Radial |
| Outer Ring Width | 18 mm |
| Capacity | Standard Capacity |
| Bore Type | Hex Bore |
| Precision | Standard |
| Snap Ring | No Snap Ring |
| Rows of Balls | Single |
| Dynamic Load Rating | 8130 lbf |
| Lubricant | Polyurea Base |
| Inner Ring Width | 1 7/16 in |
| No. in Set | Single Bearing |
| O.D. | 3.14961 in |
| O.D. Type | Spherical |
| Seal Type | Tri-Ply Shroud Seals |
| Contact Angle | 0° |
| Cage Material | Steel |
| Locking Device | No Locking Device |
| Bearing Type | Radial |
| Preload Level | None |
| Weight | 1.57 LB |
| EAN or UPC | 87796041387 |
