- 1" Shaft, 1.4375" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- The new Fafnir STB series two-bolt housed units are furnished assembled and ready for mounting by means of two bolts from under the housing.These units are ideal for applications where space is limited, access to bolt screws is from bottom of unit, loads are not severe and reversing moments are not enountered.The units are assembled with GYA-RRB bearings with positive contact land riding seals, and setscrew locking.These units are factory prelubricated, but a grease fitting is provided for relubrication if required.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Inch/Metric | Inch |
| Bolt Holes | 2 |
| Insert Type | Steel Insert |
| Bolt Hole Spacing | 2 in |
| Mounted Unit Duty | Normal-Duty |
| Lubrication | Relubricatable |
| Overall Width | 1 31/64 in |
| Bearing Type | Ball Bearing |
| Bearing Insert | GYA100RRB |
| Bolt Size | 3/8-16 |
| Bearing Design | Non-Expansion |
| Seal Type | Contact Seals |
| Series | STB Series |
| Housing Construction | 1 Piece |
| Shaft Dia. | 1 in |
| Housing Material | Cast Iron |
| Locking Device | Setscrew Locking Collar |
| Base Width | 1 31/64 in |
| End Type | Open End |
| Housing Height | 2 13/16 in |
| Bolt Hole Spacing Range [Min] | 2 in |
| Base Length | 3 in |
| Pillow Block Type | Tapped Base |
| Base Height | N/A |
| Bolt Hole Spacing Range [Max] | 2 in |
| Weight | 1.501 LB |
| EAN or UPC | 87796179974 |

