
- 1" Shaft, 1.4375" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- The new Fafnir STB series two-bolt housed units are furnished assembled and ready for mounting by means of two bolts from under the housing.These units are ideal for applications where space is limited, access to bolt screws is from bottom of unit, loads are not severe and reversing moments are not enountered.The units are assembled with GYA-RRB bearings with positive contact land riding seals, and setscrew locking.These units are factory prelubricated, but a grease fitting is provided for relubrication if required.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
Base Width | 1 31/64 in |
Insert Type | Steel Insert |
Pillow Block Type | Tapped Base |
Locking Device | Setscrew Locking Collar |
Bolt Hole Spacing | 2 in |
Bearing Design | Non-Expansion |
Bolt Size | 3/8-16 |
Lubrication | Relubricatable |
Overall Width | 1 31/64 in |
Housing Material | Cast Iron |
End Type | Open End |
Bolt Hole Spacing Range [Min] | 2 in |
Series | STB Series |
Base Length | 3 in |
Inch/Metric | Inch |
Bearing Insert | GYA100RRB |
Bolt Hole Spacing Range [Max] | 2 in |
Housing Height | 2 13/16 in |
Shaft Dia. | 1 in |
Mounted Unit Duty | Normal-Duty |
Housing Construction | 1 Piece |
Base Height | N/A |
Bearing Type | Ball Bearing |
Seal Type | Contact Seals |
Bolt Holes | 2 |
Weight | 1.501 LB |
EAN or UPC | 87796179974 |
