Find a Service Center
Alternate Products
- 1.25" Shaft, 1.6875" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- The new Fafnir STB series two-bolt housed units are furnished assembled and ready for mounting by means of two bolts from under the housing.These units are ideal for applications where space is limited, access to bolt screws is from bottom of unit, loads are not severe and reversing moments are not enountered.The units are assembled with GYA-RRB bearings with positive contact land riding seals, and setscrew locking.These units are factory prelubricated, but a grease fitting is provided for relubrication if required.
applications
- Fans and blowers
- Food processing
- Conveyors
- Agriculture
| Bolt Hole Length | N/A |
| Shaft Dia. | 1.25 in |
| Overall Width | 1 21/32 in |
| Base Height | N/A |
| Inch/Metric | Inch |
| Bearing Design | Non-Expansion |
| Bolt Hole Spacing | 3 in |
| Bearing Insert | GYA103RRB2 |
| Bolt Size | 7/16-14 |
| Mounted Unit Duty | Normal-Duty |
| Bolt Hole Width | N/A |
| Bolt Hole Spacing Range [Min] | 3 in |
| Pillow Block Type | Tapped Base |
| Bolt Holes | 2 |
| Seal Type | Contact Seals |
| Insert Type | Steel Insert |
| Housing Construction | 1 Piece |
| Housing Height | 3 1/4 in |
| Bearing Type | Ball Bearing |
| Locking Device | Setscrew Locking Collar |
| Base Width | 1 21/32 in |
| Series | STB Series |
| End Type | Open End |
| Bolt Hole Spacing Range [Max] | 3 in |
| Bolt Hole Size | N/A |
| Housing Material | Cast Iron |
| Lubrication | Relubricatable |
| Base Length | 4 in |
| Weight | 2.51 LB |
| EAN or UPC | 87796179998 |
