Find a Service Center
Alternate Products
- 1.25" Shaft, 1.6875" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- The new Fafnir STB series two-bolt housed units are furnished assembled and ready for mounting by means of two bolts from under the housing.These units are ideal for applications where space is limited, access to bolt screws is from bottom of unit, loads are not severe and reversing moments are not enountered.The units are assembled with GYA-RRB bearings with positive contact land riding seals, and setscrew locking.These units are factory prelubricated, but a grease fitting is provided for relubrication if required.
applications
- Fans and blowers
- Food processing
- Conveyors
- Agriculture
| Housing Construction | 1 Piece |
| Series | STB Series |
| Shaft Dia. | 1.25 in |
| Mounted Unit Duty | Normal-Duty |
| Locking Device | Setscrew Locking Collar |
| Bolt Hole Size | N/A |
| Insert Type | Steel Insert |
| Housing Height | 3 1/4 in |
| Bearing Insert | GYA103RRB2 |
| Bolt Hole Spacing | 3 in |
| Base Height | N/A |
| Overall Width | 1 21/32 in |
| Bolt Hole Spacing Range [Min] | 3 in |
| Bolt Holes | 2 |
| Bolt Hole Spacing Range [Max] | 3 in |
| Bearing Type | Ball Bearing |
| Base Width | 1 21/32 in |
| Bolt Hole Width | N/A |
| Seal Type | Contact Seals |
| Bearing Design | Non-Expansion |
| Lubrication | Relubricatable |
| End Type | Open End |
| Bolt Hole Length | N/A |
| Housing Material | Cast Iron |
| Base Length | 4 in |
| Bolt Size | 7/16-14 |
| Inch/Metric | Inch |
| Pillow Block Type | Tapped Base |
| Weight | 2.51 LB |
| EAN or UPC | 87796179998 |
