Find a Service Center
- 3.4375" Shaft, 5.125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir SAOL type heavy series pillow blocks are designed for applications where higher-than-usual temperature applications where for any reason one or more floating bearing units required. The floating unit allows its bearing to move axially as the shaft expands because of the temperature rise, while the fixed unit maintains shaft location. Bearings also have loose internal fit. The SAOL unit is equipped with a heavy series, self-aligning SMN wide inner ring bearing and self-locking collar. An external aligning ring is fitted to the spherical surface of the outer ring. They are equipped with oil-tight seals and are normally fitted for oil lubrication, but can be equipped for grease lubrication when specified. NOTE: Lubricate with high grade automotive or turbine oil, or ball bearing grease before installation. All units are assembled with a spacer ring (Fixed type). By removing the spacer ring, the assembly becomes a floating unit.
applications
- Food processing
- Conveyors
- Agriculture
- Fans and blowers
| Lubrication | Relubricatable |
| End Type | Open End |
| Bolt Hole Width | 1 in |
| Bolt Hole Length | 1 1/4 in |
| Total Float | 0.5313 in |
| Inch/Metric | Inch |
| Base Height | 1 1/4 in |
| Housing No. | A-4155 |
| Locking Device | Eccentric Locking Collar |
| Pillow Block Type | Thru-Bolt |
| Bearing Type | Ball Bearing |
| Overall Width | 7 1/2 in |
| Base Length | 16 1/8 in |
| Housing Construction | 1 Piece |
| Insert Type | Steel Insert |
| Seal Type | Contact Seals |
| Housing Material | Cast Iron |
| Base Width | 4 3/4 in |
| Bolt Hole Spacing | 13 3/8 in |
| Bearing Insert | SMN307KS |
| Mounted Unit Duty | Heavy-Duty |
| Collar No. | SN307K |
| Bolt Size | 7/8 in |
| Shaft Dia. | 3.4375 in |
| Bearing Design | Expansion/Non-Expansion |
| Bolt Holes | 4 |
| Weight | 102.0 LB |
| EAN or UPC | 87796062054 |
