Find a Service Center
- 3.4375" Shaft, 5.125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir SAOL type heavy series pillow blocks are designed for applications where higher-than-usual temperature applications where for any reason one or more floating bearing units required. The floating unit allows its bearing to move axially as the shaft expands because of the temperature rise, while the fixed unit maintains shaft location. Bearings also have loose internal fit. The SAOL unit is equipped with a heavy series, self-aligning SMN wide inner ring bearing and self-locking collar. An external aligning ring is fitted to the spherical surface of the outer ring. They are equipped with oil-tight seals and are normally fitted for oil lubrication, but can be equipped for grease lubrication when specified. NOTE: Lubricate with high grade automotive or turbine oil, or ball bearing grease before installation. All units are assembled with a spacer ring (Fixed type). By removing the spacer ring, the assembly becomes a floating unit.
applications
- Food processing
- Conveyors
- Agriculture
- Fans and blowers
| Bolt Size | 7/8 in |
| Bolt Hole Width | 1 in |
| Base Length | 16 1/8 in |
| Bearing Type | Ball Bearing |
| Bearing Insert | SMN307KS |
| Housing Material | Cast Iron |
| Lubrication | Relubricatable |
| Insert Type | Steel Insert |
| Collar No. | SN307K |
| Locking Device | Eccentric Locking Collar |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing | 13 3/8 in |
| Base Height | 1 1/4 in |
| Total Float | 0.5313 in |
| Inch/Metric | Inch |
| Mounted Unit Duty | Heavy-Duty |
| Base Width | 4 3/4 in |
| Bearing Design | Expansion/Non-Expansion |
| Housing No. | A-4155 |
| Overall Width | 7 1/2 in |
| Shaft Dia. | 3.4375 in |
| Housing Construction | 1 Piece |
| Seal Type | Contact Seals |
| Bolt Hole Length | 1 1/4 in |
| End Type | Open End |
| Bolt Holes | 4 |
| Weight | 102.0 LB |
| EAN or UPC | 87796062054 |
