Find a Service Center
- Single Row Radial Bearing, 0.875" ID x 1.875" OD x 0.500" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Preload Level | None |
| Fillet Radius | 0.031 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Inch/Metric | Inch Bore |
| Snap Ring | No Snap Ring |
| I.D. | 7/8 in |
| Material | Steel |
| Width | 1/2 in |
| Bearing Type | Radial |
| Outer Ring Width | 1/2 in |
| Lubricant | Polyurea Base |
| Locking Device | No Locking Device |
| No. in Set | Single Bearing |
| O.D. | 1 7/8 in |
| Enclosure | Double Sealed |
| Cage Type | Metal |
| Static Load Rating [Max] | 1,120.00 lbf |
| Radial Internal Clearance | C3 |
| Contact Angle | 0° |
| Ball Material | Steel |
| Temperature Range [Max] | 275 °F |
| Dynamic Load Rating | 2,500.00 lbf |
| Origin | Single Row Radial |
| Precision | Standard |
| Precision Level | Standard (ABEC 1) |
| Bore Type | Round Bore |
| Seal Material | Buna-N |
| Rows of Balls | Single |
| Inner Ring Width | 1/2 in |
| Closed Width | 1/2 in |
| Cage Material | Steel |
| Open Width | 3/8 in |
| Seal Type | Contact Seals |
| Capacity | Standard Capacity |
| O.D. Type | Straight |
| Temperature Range [Min] | -30 °F |
| icNumber | 7698129 |
| Weight | 0.29 LB |
| EAN or UPC | 87796074729 |
