Find a Service Center
- Single Row Radial Bearing, 0.875" ID x 1.875" OD x 0.500" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| No. in Set | Single Bearing |
| Seal Material | Buna-N |
| Bearing Type | Radial |
| icNumber | 7698129 |
| Seal Type | Contact Seals |
| Locking Device | No Locking Device |
| Fillet Radius | 0.031 in |
| Outer Ring Width | 1/2 in |
| Bore Type | Round Bore |
| Origin | Single Row Radial |
| Cage Type | Metal |
| Open Width | 3/8 in |
| Material | Steel |
| Temperature Range [Min] | -30 °F |
| Radial Internal Clearance | C3 |
| Width | 1/2 in |
| Contact Angle | 0° |
| Lubricant | Polyurea Base |
| Rows of Balls | Single |
| Preload Level | None |
| Dynamic Load Rating | 2,500.00 lbf |
| Inner Ring Width | 1/2 in |
| Temperature Range [Max] | 275 °F |
| Precision Level | Standard (ABEC 1) |
| Enclosure | Double Sealed |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Capacity | Standard Capacity |
| O.D. Type | Straight |
| Closed Width | 1/2 in |
| Precision | Standard |
| Inch/Metric | Inch Bore |
| Static Load Rating [Max] | 1,120.00 lbf |
| O.D. | 1 7/8 in |
| Snap Ring | No Snap Ring |
| I.D. | 7/8 in |
| Ball Material | Steel |
| Cage Material | Steel |
| Weight | 0.29 LB |
| EAN or UPC | 87796074729 |
