Find a Service Center
- Single Row Radial Bearing, 0.875" ID x 1.875" OD x 0.5" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Locking Device | No Locking Device |
| No. in Set | Single Bearing |
| Ball Material | Steel |
| Seal Type | Non-Contact Seals |
| Open Width | 3/8 in |
| Preload Level | None |
| Lubricant | Polyurea Base |
| Inch/Metric | Inch Bore |
| Static Load Rating [Max] | 1,120.00 lbf |
| Temperature Range [Max] | 275 °F |
| Fillet Radius | 0.031 in |
| Origin | Single Row Radial |
| Precision Level | Standard (ABEC 1) |
| Material | Steel |
| Bearing Type | Radial |
| Precision | Standard |
| Seal Material | Metal |
| Width | 1/2 in |
| Capacity | Standard Capacity |
| Inner Ring Width | 1/2 in |
| icNumber | 7696983 |
| Snap Ring | No Snap Ring |
| Outer Ring Width | 1/2 in |
| Bore Type | Round Bore |
| Dynamic Load Rating | 2,500.00 lbf |
| Closed Width | 1/2 in |
| O.D. | 1 7/8 in |
| Cage Type | Metal |
| Temperature Range [Min] | -30 °F |
| Contact Angle | 0° |
| Cage Material | Steel |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| I.D. | 7/8 in |
| O.D. Type | Straight |
| Rows of Balls | Single |
| Enclosure | Double Shielded |
| Radial Internal Clearance | C3 |
| Weight | 0.29 LB |
| EAN or UPC | 87796044807 |
| NSN Number | 3110-00-155-8883 |
