Find a Service Center
- Single Row Radial Bearing, 0.875" ID x 1.875" OD x 0.5" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Outer Ring Width | 1/2 in |
| Seal Type | Non-Contact Seals |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Inner Ring Width | 1/2 in |
| Bearing Type | Radial |
| Contact Angle | 0° |
| icNumber | 7696983 |
| I.D. | 7/8 in |
| Temperature Range [Max] | 275 °F |
| Radial Internal Clearance | C3 |
| Static Load Rating [Max] | 1,120.00 lbf |
| Locking Device | No Locking Device |
| O.D. | 1 7/8 in |
| Snap Ring | No Snap Ring |
| Open Width | 3/8 in |
| Seal Material | Metal |
| Origin | Single Row Radial |
| Fillet Radius | 0.031 in |
| Material | Steel |
| Lubricant | Polyurea Base |
| Precision | Standard |
| Width | 1/2 in |
| Rows of Balls | Single |
| Closed Width | 1/2 in |
| Precision Level | Standard (ABEC 1) |
| Dynamic Load Rating | 2,500.00 lbf |
| Cage Material | Steel |
| Enclosure | Double Shielded |
| Inch/Metric | Inch Bore |
| Preload Level | None |
| Capacity | Standard Capacity |
| Temperature Range [Min] | -30 °F |
| Bore Type | Round Bore |
| O.D. Type | Straight |
| No. in Set | Single Bearing |
| Ball Material | Steel |
| Cage Type | Metal |
| Weight | 0.29 LB |
| EAN or UPC | 87796044807 |
| NSN Number | 3110-00-155-8883 |
