Find a Service Center
- Single Row Radial Bearing, 0.875" ID x 1.875" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| O.D. Type | Straight |
| Cage Material | Steel |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Precision | Standard |
| Bearing Type | Radial |
| Open Width | 3/8 in |
| Locking Device | No Locking Device |
| Lubricant | Oil Preservative |
| I.D. | 7/8 in |
| Cage Type | Metal |
| Preload Level | None |
| Enclosure | Open |
| O.D. | 1 7/8 in |
| Ball Material | Steel |
| Fillet Radius | 0.031 in |
| Rows of Balls | Single |
| Closed Width | 1/2 in |
| Origin | Single Row Radial |
| Material | Steel |
| Capacity | Standard Capacity |
| Seal Type | Unsealed |
| No. in Set | Single Bearing |
| icNumber | 7697581 |
| Precision Level | Standard (ABEC 1) |
| Width | 3/8 in |
| Radial Internal Clearance | C3 |
| Snap Ring | No Snap Ring |
| Contact Angle | 0° |
| Inner Ring Width | 3/8 in |
| Dynamic Load Rating | 2,500.00 lbf |
| Bore Type | Round Bore |
| Inch/Metric | Inch Bore |
| Pre Lubricant | None |
| Seal Material | None |
| Static Load Rating [Max] | 1,120.00 lbf |
| Outer Ring Width | 3/8 in |
| Weight | 0.14 LB |
| EAN or UPC | 87796044791 |
| NSN Number | 3110-00-554-5715 |
