Find a Service Center
- Single Row Radial Bearing, 0.875" ID x 1.875" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Cage Material | Steel |
| I.D. | 7/8 in |
| O.D. | 1 7/8 in |
| Locking Device | No Locking Device |
| Snap Ring | No Snap Ring |
| Lubricant | Oil Preservative |
| Pre Lubricant | None |
| Origin | Single Row Radial |
| Rows of Balls | Single |
| Dynamic Load Rating | 2,500.00 lbf |
| Radial Internal Clearance | C3 |
| Cage Type | Metal |
| Outer Ring Width | 3/8 in |
| Open Width | 3/8 in |
| Bearing Type | Radial |
| Fillet Radius | 0.031 in |
| Inner Ring Width | 3/8 in |
| Closed Width | 1/2 in |
| Enclosure | Open |
| Inch/Metric | Inch Bore |
| Width | 3/8 in |
| Static Load Rating [Max] | 1,120.00 lbf |
| Preload Level | None |
| Capacity | Standard Capacity |
| Precision | Standard |
| Seal Material | None |
| Ball Material | Steel |
| O.D. Type | Straight |
| No. in Set | Single Bearing |
| Contact Angle | 0° |
| Seal Type | Unsealed |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Bore Type | Round Bore |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| icNumber | 7697581 |
| Weight | 0.14 LB |
| EAN or UPC | 87796044791 |
| NSN Number | 3110-00-554-5715 |
