Find a Service Center
- Single Row Radial Bearing, 0.75" ID x 1.625" OD x 7/16" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Material | Steel |
| Preload Level | None |
| Inner Ring Width | 7/16 in |
| Temperature Range [Min] | -30 °F |
| Dynamic Load Rating | 2,320.00 lbf |
| Static Load Rating [Max] | 1,000.00 lbf |
| Seal Material | Buna-N |
| Fillet Radius | 0.031 in |
| Lubricant | Polyurea Base |
| Enclosure | Double Sealed |
| Ball Material | Steel |
| Origin | Single Row Radial |
| Precision Level | Standard (ABEC 1) |
| icNumber | 7697085 |
| Capacity | Standard Capacity |
| Temperature Range [Max] | 275 °F |
| Radial Internal Clearance | C3 |
| Locking Device | No Locking Device |
| Bore Type | Round Bore |
| Inch/Metric | Inch Bore |
| Closed Width | 7/16 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Bearing Type | Radial |
| Cage Type | Metal |
| Contact Angle | 0° |
| No. in Set | Single Bearing |
| Snap Ring | No Snap Ring |
| Outer Ring Width | 7/16 in |
| I.D. | 3/4 in |
| Seal Type | Contact Seals |
| Cage Material | Steel |
| Open Width | 0.312 in |
| O.D. | 1 5/8 in |
| O.D. Type | Straight |
| Precision | Standard |
| Width | 7/16 in |
| Rows of Balls | Single |
| Weight | 0.132 LB |
| EAN or UPC | 87796044784 |
| NSN Number | 3110-00-759-3968 |
