Find a Service Center
- Single Row Radial Bearing, 0.75" ID x 1.625" OD x 7/16" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| O.D. Type | Straight |
| Inch/Metric | Inch Bore |
| Enclosure | Double Sealed |
| Precision Level | Standard (ABEC 1) |
| Inner Ring Width | 7/16 in |
| Lubricant | Polyurea Base |
| Material | Steel |
| Temperature Range [Min] | -30 °F |
| Fillet Radius | 0.031 in |
| Bore Type | Round Bore |
| Static Load Rating [Max] | 1,000.00 lbf |
| No. in Set | Single Bearing |
| Rows of Balls | Single |
| Open Width | 0.312 in |
| Precision | Standard |
| Ball Material | Steel |
| Contact Angle | 0° |
| Snap Ring | No Snap Ring |
| Width | 7/16 in |
| Temperature Range [Max] | 275 °F |
| Seal Type | Contact Seals |
| Dynamic Load Rating | 2,320.00 lbf |
| icNumber | 7697085 |
| Seal Material | Buna-N |
| Cage Type | Metal |
| Closed Width | 7/16 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Preload Level | None |
| Bearing Type | Radial |
| Radial Internal Clearance | C3 |
| Capacity | Standard Capacity |
| Outer Ring Width | 7/16 in |
| Cage Material | Steel |
| I.D. | 3/4 in |
| Origin | Single Row Radial |
| O.D. | 1 5/8 in |
| Locking Device | No Locking Device |
| Weight | 0.132 LB |
| EAN or UPC | 87796044784 |
| NSN Number | 3110-00-759-3968 |
