Find a Service Center
- Single Row Radial Bearing, 0.75" ID x 1.625" OD x 7/16" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Contact Angle | 0° |
| Bearing Type | Radial |
| Rows of Balls | Single |
| Precision | Standard |
| Cage Material | Steel |
| Open Width | 0.312 in |
| I.D. | 3/4 in |
| Width | 7/16 in |
| No. in Set | Single Bearing |
| Material | Steel |
| O.D. | 1 5/8 in |
| Seal Material | Metal |
| O.D. Type | Straight |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| Inch/Metric | Inch Bore |
| Static Load Rating [Max] | 1,000.00 lbf |
| Temperature Range [Max] | 275 °F |
| Outer Ring Width | 7/16 in |
| Snap Ring | No Snap Ring |
| Fillet Radius | 0.031 in |
| Bore Type | Round Bore |
| Dynamic Load Rating | 2,320.00 lbf |
| Radial Internal Clearance | C3 |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Preload Level | None |
| Temperature Range [Min] | -30 °F |
| Closed Width | 7/16 in |
| Origin | Single Row Radial |
| Cage Type | Metal |
| Inner Ring Width | 7/16 in |
| Seal Type | Non-Contact Seals |
| Capacity | Standard Capacity |
| Enclosure | Double Shielded |
| icNumber | 7697007 |
| Ball Material | Steel |
| Lubricant | Polyurea Base |
| Weight | 0.132 LB |
| EAN or UPC | 87796044777 |
| NSN Number | 3110-00-155-8874, 3110-00-825-7002 |
