Find a Service Center
- Single Row Radial Bearing, 0.75" ID x 1.625" OD x 7/16" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Seal Material | Metal |
| Precision Level | Standard (ABEC 1) |
| Seal Type | Non-Contact Seals |
| Fillet Radius | 0.031 in |
| I.D. | 3/4 in |
| Snap Ring | No Snap Ring |
| Outer Ring Width | 7/16 in |
| O.D. | 1 5/8 in |
| Radial Internal Clearance | C3 |
| Capacity | Standard Capacity |
| Dynamic Load Rating | 2,320.00 lbf |
| Inch/Metric | Inch Bore |
| Locking Device | No Locking Device |
| Cage Material | Steel |
| Enclosure | Double Shielded |
| No. in Set | Single Bearing |
| Lubricant | Polyurea Base |
| Static Load Rating [Max] | 1,000.00 lbf |
| Bearing Type | Radial |
| Origin | Single Row Radial |
| Preload Level | None |
| Inner Ring Width | 7/16 in |
| Open Width | 0.312 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| icNumber | 7697007 |
| Ball Material | Steel |
| Material | Steel |
| Bore Type | Round Bore |
| Precision | Standard |
| Contact Angle | 0° |
| Temperature Range [Max] | 275 °F |
| Rows of Balls | Single |
| Temperature Range [Min] | -30 °F |
| Closed Width | 7/16 in |
| O.D. Type | Straight |
| Cage Type | Metal |
| Width | 7/16 in |
| Weight | 0.132 LB |
| EAN or UPC | 87796044777 |
| NSN Number | 3110-00-155-8874, 3110-00-825-7002 |
