Find a Service Center
- Single Row Radial Bearing, 0.75" ID x 1.625" OD x 7/16" Wide, Single Shield (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Ball Material | Steel |
| Lubricant | Oil Preservative |
| Inner Ring Width | 7/16 in |
| I.D. | 3/4 in |
| Width | 7/16 in |
| O.D. | 1.625 in |
| Bore Type | Round Bore |
| O.D. Type | Straight |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Enclosure | Single Shield |
| Pre Lubricant | None |
| Material | Steel |
| Inch/Metric | Inch Bore |
| Static Load Rating [Max] | 1000 lbf |
| No. in Set | Single Bearing |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | No Snap Ring |
| Contact Angle | 0° |
| Cage Material | Steel |
| Outer Ring Width | 7/16 in |
| icNumber | 7699230 |
| Seal Type | Non-Contact Seals |
| Fillet Radius | 0.031 in |
| Precision | Standard |
| Dynamic Load Rating | 2320 lbf |
| Preload Level | None |
| Radial Internal Clearance | C3 |
| Origin | Single Row Radial |
| Bearing Type | Radial |
| Capacity | Standard Capacity |
| Seal Material | Metal |
| Cage Type | Metal |
| Rows of Balls | Single |
| Locking Device | No Locking Device |
| Weight | 0.26 LB |
| EAN or UPC | 87796044760 |
| NSN Number | 3110-00-293-9047 |
