Find a Service Center
- Single Row Radial Bearing, 0.75" ID x 1.625" OD x 7/16" Wide, Single Shield (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Material | Steel |
| Ball Material | Steel |
| Enclosure | Single Shield |
| Bore Type | Round Bore |
| Lubricant | Oil Preservative |
| Origin | Single Row Radial |
| O.D. Type | Straight |
| Bearing Type | Radial |
| Locking Device | No Locking Device |
| Capacity | Standard Capacity |
| Precision Level | Standard (ABEC 1) |
| Seal Type | Non-Contact Seals |
| Inner Ring Width | 7/16 in |
| I.D. | 3/4 in |
| Radial Internal Clearance | C3 |
| O.D. | 1.625 in |
| Precision | Standard |
| Outer Ring Width | 7/16 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Width | 7/16 in |
| No. in Set | Single Bearing |
| Cage Type | Metal |
| Rows of Balls | Single |
| Pre Lubricant | None |
| Seal Material | Metal |
| Static Load Rating [Max] | 1000 lbf |
| Fillet Radius | 0.031 in |
| Contact Angle | 0° |
| Snap Ring | No Snap Ring |
| Dynamic Load Rating | 2320 lbf |
| icNumber | 7699230 |
| Inch/Metric | Inch Bore |
| Preload Level | None |
| Cage Material | Steel |
| Weight | 0.26 LB |
| EAN or UPC | 87796044760 |
| NSN Number | 3110-00-293-9047 |
