Find a Service Center
- Single Row Radial Bearing, 0.625" ID x 1.375" OD x 11/32" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- Automotive
- Agricultural
- Utilities
- Chemical
- General industrial
| Seal Material | Buna-N |
| Contact Angle | 0° |
| Snap Ring | No Snap Ring |
| Ball Material | Steel |
| Temperature Range [Max] | 275 °F |
| Cage Type | Metal |
| Open Width | 9/32 in |
| Temperature Range [Min] | -30 °F |
| icNumber | 7696518 |
| No. in Set | Single Bearing |
| Closed Width | 11/32 in |
| Inner Ring Width | 11/32 in |
| Dynamic Load Rating | 1,700.00 lbf |
| Lubricant | Polyurea Base |
| Width | 11/32 in |
| Bearing Type | Radial |
| Static Load Rating [Max] | 682.00 lbf |
| Fillet Radius | 0.031 in |
| Enclosure | Double Sealed |
| I.D. | 5/8 in |
| Origin | Single Row Radial |
| Locking Device | No Locking Device |
| Material | Steel |
| O.D. | 1 3/8 in |
| Radial Internal Clearance | C3 |
| O.D. Type | Straight |
| Outer Ring Width | 11/32 in |
| Precision Level | Standard (ABEC 1) |
| Bore Type | Round Bore |
| Seal Type | Contact Seals |
| Cage Material | Steel |
| Capacity | Standard Capacity |
| Preload Level | None |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Inch/Metric | Inch Bore |
| Rows of Balls | Single |
| Precision | Standard |
| Weight | 0.088 LB |
| EAN or UPC | 87796044746 |
