Find a Service Center
- Single Row Radial Bearing, 0.625" ID x 1.375" OD x 11/32" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- Automotive
- Agricultural
- Utilities
- Chemical
- General industrial
| Dynamic Load Rating | 1,700.00 lbf |
| Inner Ring Width | 11/32 in |
| Precision Level | Standard (ABEC 1) |
| No. in Set | Single Bearing |
| Precision | Standard |
| Lubricant | Polyurea Base |
| Radial Internal Clearance | C3 |
| I.D. | 5/8 in |
| Closed Width | 11/32 in |
| Cage Type | Metal |
| Seal Type | Contact Seals |
| Outer Ring Width | 11/32 in |
| Temperature Range [Max] | 275 °F |
| O.D. | 1 3/8 in |
| Origin | Single Row Radial |
| Enclosure | Double Sealed |
| Open Width | 9/32 in |
| Static Load Rating [Max] | 682.00 lbf |
| Snap Ring | No Snap Ring |
| Seal Material | Buna-N |
| Inch/Metric | Inch Bore |
| Ball Material | Steel |
| Cage Material | Steel |
| Bearing Type | Radial |
| Capacity | Standard Capacity |
| Locking Device | No Locking Device |
| Rows of Balls | Single |
| Preload Level | None |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| O.D. Type | Straight |
| Width | 11/32 in |
| Material | Steel |
| Contact Angle | 0° |
| Fillet Radius | 0.031 in |
| Temperature Range [Min] | -30 °F |
| Bore Type | Round Bore |
| icNumber | 7696518 |
| Weight | 0.088 LB |
| EAN or UPC | 87796044746 |
