Find a Service Center
- Single Row Radial Bearing, 0.625" ID x 1.375" OD x 11/32" Wide, Single Shield (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Precision | Standard |
| Snap Ring | No Snap Ring |
| O.D. | 1.375 in |
| Outer Ring Width | 11/32 in |
| Origin | Single Row Radial |
| O.D. Type | Straight |
| Dynamic Load Rating | 1700 lbf |
| No. in Set | Single Bearing |
| I.D. | 5/8 in |
| Width | 11/32 in |
| Bearing Type | Radial |
| Static Load Rating [Max] | 682 lbf |
| Enclosure | Single Shield |
| Radial Internal Clearance | C3 |
| Contact Angle | 0° |
| Lubricant | Oil Preservative |
| icNumber | 7699212 |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Capacity | Standard Capacity |
| Cage Type | Metal |
| Seal Type | Non-Contact Seals |
| Cage Material | Steel |
| Preload Level | None |
| Pre Lubricant | None |
| Rows of Balls | Single |
| Material | Steel |
| Fillet Radius | 0.031 in |
| Inner Ring Width | 11/32 in |
| Locking Device | No Locking Device |
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Bore Type | Round Bore |
| Inch/Metric | Inch Bore |
| Seal Material | Metal |
| Weight | 0.22 LB |
| EAN or UPC | 87796044722 |
| NSN Number | 3110-00-554-5237 |
