Find a Service Center
- Single Row Radial Bearing, 0.625" ID x 1.375" OD x 11/32" Wide, Single Shield (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Bore Type | Round Bore |
| No. in Set | Single Bearing |
| Material | Steel |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Material | Metal |
| O.D. Type | Straight |
| Ball Material | Steel |
| Locking Device | No Locking Device |
| Cage Type | Metal |
| Outer Ring Width | 11/32 in |
| Pre Lubricant | None |
| Static Load Rating [Max] | 682 lbf |
| Fillet Radius | 0.031 in |
| Radial Internal Clearance | C3 |
| Origin | Single Row Radial |
| Lubricant | Oil Preservative |
| I.D. | 5/8 in |
| Inch/Metric | Inch Bore |
| Precision | Standard |
| Cage Material | Steel |
| Preload Level | None |
| Snap Ring | No Snap Ring |
| O.D. | 1.375 in |
| Bearing Type | Radial |
| icNumber | 7699212 |
| Rows of Balls | Single |
| Enclosure | Single Shield |
| Contact Angle | 0° |
| Capacity | Standard Capacity |
| Inner Ring Width | 11/32 in |
| Dynamic Load Rating | 1700 lbf |
| Seal Type | Non-Contact Seals |
| Precision Level | Standard (ABEC 1) |
| Width | 11/32 in |
| Weight | 0.22 LB |
| EAN or UPC | 87796044722 |
| NSN Number | 3110-00-554-5237 |
