Find a Service Center
- Single Row Radial Bearing, 1/2" ID x 1 1/8" OD x 5/16" Wide, Single Shield (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Cage Material | Steel |
| Bearing Type | Radial |
| Width | 5/16 in |
| Precision | Standard |
| Capacity | Standard Capacity |
| Radial Internal Clearance | C3 |
| Pre Lubricant | None |
| Enclosure | Single Shield |
| Outer Ring Width | 5/16 in |
| Inner Ring Width | 5/16 in |
| Rows of Balls | Single |
| Contact Angle | 0° |
| Seal Type | Non-Contact Seals |
| Dynamic Load Rating | 1280 lbf |
| Snap Ring | No Snap Ring |
| Inch/Metric | Inch Bore |
| No. in Set | Single Bearing |
| Precision Level | Standard (ABEC 1) |
| Material | Steel |
| icNumber | 7699228 |
| Fillet Radius | 0.016 in |
| Ball Material | Steel |
| Origin | Single Row Radial |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Cage Type | Metal |
| Bore Type | Round Bore |
| Static Load Rating [Max] | 500 lbf |
| Seal Material | Metal |
| Preload Level | None |
| O.D. Type | Straight |
| O.D. | 1.125 in |
| Locking Device | No Locking Device |
| I.D. | 1/2 in |
| Lubricant | Oil Preservative |
| Weight | 0.19 LB |
| EAN or UPC | 87796044357 |
| NSN Number | 3110-00-554-6125 |
