
- Single Row Radial Bearing, 1/2" ID x 1 1/8" OD x 5/16" Wide, Single Shield (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
No. in Set | Single Bearing |
Rows of Balls | Single |
Outer Ring Width | 5/16 in |
Precision | Standard |
Pre Lubricant | None |
Cage Type | Metal |
I.D. | 1/2 in |
Locking Device | No Locking Device |
Seal Material | Metal |
icNumber | 7699228 |
Ball Material | Steel |
Enclosure | Single Shield |
Cage Material | Steel |
Origin | Single Row Radial |
Radial Internal Clearance Specification | Greater Than Normal Clearance |
Bore Type | Round Bore |
Inch/Metric | Inch Bore |
Width | 5/16 in |
Contact Angle | 0° |
Inner Ring Width | 5/16 in |
Precision Level | Standard (ABEC 1) |
Radial Internal Clearance | C3 |
Lubricant | Oil Preservative |
O.D. Type | Straight |
Preload Level | None |
Snap Ring | No Snap Ring |
Seal Type | Non-Contact Seals |
Fillet Radius | 0.016 in |
O.D. | 1.125 in |
Static Load Rating [Max] | 500 lbf |
Capacity | Standard Capacity |
Dynamic Load Rating | 1280 lbf |
Bearing Type | Radial |
Material | Steel |
Weight | 0.19 LB |
EAN or UPC | 87796044357 |
NSN Number | 3110-00-554-6125 |
