Find a Service Center
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 9/32" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Ball Material | Steel |
| Outer Ring Width | 9/32 in |
| Inch/Metric | Inch Bore |
| Temperature Range [Max] | 275 °F |
| Open Width | 7/32 in |
| Inner Ring Width | 9/32 in |
| Preload Level | None |
| No. in Set | Single Bearing |
| Closed Width | 9/32 in |
| Precision Level | Standard (ABEC 1) |
| Dynamic Load Rating | 830.00 lbf |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Radial Internal Clearance | C3 |
| Bore Type | Round Bore |
| I.D. | 3/8 in |
| Rows of Balls | Single |
| Seal Type | Non-Contact Seals |
| Capacity | Standard Capacity |
| Material | Steel |
| Locking Device | No Locking Device |
| Lubricant | Polyurea Base |
| icNumber | 7695900 |
| Seal Material | Metal |
| Origin | Single Row Radial |
| Static Load Rating [Max] | 312.00 lbf |
| Enclosure | Double Shielded |
| Cage Material | Steel |
| Bearing Type | Radial |
| Fillet Radius | 0.016 in |
| Cage Type | Metal |
| O.D. Type | Straight |
| Snap Ring | No Snap Ring |
| Precision | Standard |
| Width | 9/32 in |
| Contact Angle | 0° |
| Temperature Range [Min] | -30 °F |
| O.D. | 7/8 in |
| Weight | 0.17 LB |
| EAN or UPC | 87796044227 |
| NSN Number | 3110-00-175-1120 |
