Find a Service Center
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 9/32" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Radial Internal Clearance | C3 |
| Closed Width | 9/32 in |
| I.D. | 3/8 in |
| Cage Type | Metal |
| Static Load Rating [Max] | 312.00 lbf |
| Origin | Single Row Radial |
| Temperature Range [Min] | -30 °F |
| Width | 9/32 in |
| Material | Steel |
| O.D. | 7/8 in |
| Fillet Radius | 0.016 in |
| Inner Ring Width | 9/32 in |
| O.D. Type | Straight |
| Inch/Metric | Inch Bore |
| Seal Material | Metal |
| Enclosure | Double Shielded |
| No. in Set | Single Bearing |
| Bearing Type | Radial |
| Preload Level | None |
| Precision Level | Standard (ABEC 1) |
| Open Width | 7/32 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Capacity | Standard Capacity |
| Dynamic Load Rating | 830.00 lbf |
| Temperature Range [Max] | 275 °F |
| Lubricant | Polyurea Base |
| Ball Material | Steel |
| Seal Type | Non-Contact Seals |
| Outer Ring Width | 9/32 in |
| Precision | Standard |
| Bore Type | Round Bore |
| icNumber | 7695900 |
| Contact Angle | 0° |
| Rows of Balls | Single |
| Locking Device | No Locking Device |
| Snap Ring | No Snap Ring |
| Cage Material | Steel |
| Weight | 0.17 LB |
| EAN or UPC | 87796044227 |
| NSN Number | 3110-00-175-1120 |
