Find a Service Center
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 0.28125" Wide, Single Shield (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| I.D. | 3/8 in |
| Outer Ring Width | 9/32 in |
| Precision Level | Standard (ABEC 1) |
| Origin | Single Row Radial |
| Pre Lubricant | None |
| Seal Material | Metal |
| Cage Material | Steel |
| Static Load Rating [Max] | 312 lbf |
| Precision | Standard |
| Ball Material | Steel |
| Cage Type | Metal |
| Radial Internal Clearance | C3 |
| No. in Set | Single Bearing |
| Rows of Balls | Single |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Locking Device | No Locking Device |
| Material | Steel |
| Bearing Type | Radial |
| Preload Level | None |
| Enclosure | Single Shield |
| O.D. | 0.875 in |
| Lubricant | Oil Preservative |
| Dynamic Load Rating | 830 lbf |
| Width | 9/32 in |
| Inch/Metric | Inch Bore |
| Contact Angle | 0° |
| O.D. Type | Straight |
| Seal Type | Non-Contact Seals |
| Capacity | Standard Capacity |
| Snap Ring | No Snap Ring |
| Fillet Radius | 0.016 in |
| Bore Type | Round Bore |
| icNumber | 7699231 |
| Inner Ring Width | 9/32 in |
| Weight | 0.17 LB |
| EAN or UPC | 87796044210 |
| NSN Number | 3110-00-155-8413 |
