Find a Service Center
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 0.28125" Wide, Single Shield (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Pre Lubricant | None |
| Seal Type | Non-Contact Seals |
| Bearing Type | Radial |
| Origin | Single Row Radial |
| Cage Material | Steel |
| Ball Material | Steel |
| Static Load Rating [Max] | 312 lbf |
| icNumber | 7699231 |
| Outer Ring Width | 9/32 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Lubricant | Oil Preservative |
| O.D. | 0.875 in |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Contact Angle | 0° |
| Cage Type | Metal |
| Locking Device | No Locking Device |
| Capacity | Standard Capacity |
| Dynamic Load Rating | 830 lbf |
| Preload Level | None |
| Inch/Metric | Inch Bore |
| Radial Internal Clearance | C3 |
| I.D. | 3/8 in |
| Width | 9/32 in |
| Fillet Radius | 0.016 in |
| Inner Ring Width | 9/32 in |
| Precision | Standard |
| Seal Material | Metal |
| Rows of Balls | Single |
| No. in Set | Single Bearing |
| Enclosure | Single Shield |
| Snap Ring | No Snap Ring |
| O.D. Type | Straight |
| Bore Type | Round Bore |
| Weight | 0.17 LB |
| EAN or UPC | 87796044210 |
| NSN Number | 3110-00-155-8413 |
